PRS SE Custom 24 Wood Truss Rod Cover Walnut

Thank you for viewing.
I am selling items I personally make under the name innermountain GUITAR and miscellaneous.
I have a small number of other items listed, so please click on the seller's name to view my other listings.

This product is a wooden truss rod cover for PRS SE Custom24.
Please consider this for upgrading from the genuine plastic truss rod cover or for replacing a genuine part that has deteriorated over time.

[Product Details]
PRS SE models manufactured in recent years have a distance of 43mm from the nut to the center of the screw hole, while older models manufactured before that have a distance of 45mm from the nut to the center of the screw hole.
The shape is almost the same as the older models, but it appears to be slightly slimmer.
This product is made to the specifications of recent models with a distance of 43mm from the nut to the center of the screw hole, and with the shape of the older models.
Please confirm the length from the nut to the center of the screw hole again before purchasing.

The wood used is walnut.
Since it is walnut with curl, it has a beautiful finish with a shimmering grain.
No coloring is applied; it is made to take advantage of the natural color of walnut.
Photo 6 is the closest to the actual color, so please refer to it.

The finish is an oil finish using Xotic Oil Gel.
Due to the characteristics of Xotic Oil Gel, a film is formed even with an oil finish, resulting in a glossy finish.

The thickness is approximately 1.5mm to 2mm.
Please check photo 10 for product dimensions.
While I measure as accurately as possible, please note that there may be slight errors due to it being handmade.

To prevent warping and cracking, wood hardener is used to strengthen the wood as much as possible.
However, as it is made of wood, please understand that warping, cracking, etc., may occur if the screws are tightened too much, if impact is applied, or due to changes in humidity.
Please be especially careful when tightening the screws during installation.

Mounting screws are not included.

#innermountain
#prs
#se
#trussrodcover
#guitarparts
#handmade
#wood

[Management Number: TR-150126p]