Sanwa Supply Display Switcher (3 Circuits)

Sanwa Supply Display Switch (3 Circuits)
Some text was faded, so I wrote over it with a marker.

Product Description
● This is a manual display switcher that switches all signals from pin 1 to pin 15 of the display connector for all circuits in a straight-through connection.
● When switching, the display cable is simply extended, so compatibility issues are almost nonexistent.
● Supports widescreen displays.
● With all circuits switched and a straight-through wiring specification, it is compatible with all types of computers.
● RoHS compliant product.
* Computers connected to ports that are not currently switched will be in a state where no display is connected. Depending on the computer, this may cause the external video output to stop or the resolution settings to be reset. This is due to the specifications of the computer (graphics board) and cannot be supported by this product. Please be aware of this in advance.
* The display may not output at the correct resolution if it is not connected when the computer starts up. In such cases, please switch to the computer that is starting up and turn on the computer with the display connected.
* Image signals experience significant signal loss over cables, and the degree of degradation is heavily influenced by cable quality. Especially for long-distance transmission, please use high-quality coaxial cables. Ghosting or image quality degradation may occur due to noisy environments or the specific display and computer being used.
* Mini D-sub (HD) 15pin = HD (3WAY) 15pin.