Rack Case Punch Studio Rack Audio PA 11U 13U Roadie

Rack Case Studio Rack

Please note that prices may be lowered or raised depending on the time and circumstances.

・Size
Width: Approx. 53cm
Depth: Approx. 52.5cm
Height: Approx. 76cm

This is an 11U rack case.
There is a space at the bottom for storing power supplies, etc., but if you remove this, you can utilize it as 13U of racking space.

Power: Type C 30A
1 Type C outlet and 2 parallel outlets on the front.
4 parallel outlets on the back.
4 parallel outlets are extended from the top (all on the same circuit).
It should be easy to power the equipment you rack.

The material is wood with a punch finish on top. It is very sturdily built.

A panel was attached to the back, and it was used as a portable amplifier rack.

Front: Wooden lid
Back: Not equipped with a fan, but designed to accommodate two cooling fans.
The front lid and rear wooden panel can be removed, allowing it to be used as an open-style studio rack as shown in image 4. It would be suitable for use with outboard gear or permanently installed equipment.

Please note that we will not be using bubble wrap or cardboard for packaging during shipping.
We will wrap it with packing wrap, apply masking tape to the front wooden lid, and then attach the shipping label for delivery.

This is a used item. As it has been used, there are scratches and dirt. Please be aware of this in advance.
It will be lightly cleaned before shipping.
There are scratches, dirt, and peeling of the punch finish, but it is still in a usable condition.