HT-1934-3 Soldering Tool DIY

Thank you for viewing ?
Immediate purchase is OK ?

This is a brand new, unused item! ??
It is a cordless, pen-type gas soldering iron set.

I received it from an acquaintance,
so I am not familiar with the detailed usage.

*Operation has not been confirmed.

*The usage instructions have been translated using Google,
so I will include them for your reference.

[1. Gas Filling]
1. Please use high-quality gas. Ensure the switch is in the OFF position before filling.
2. Inject gas in the direction shown in the diagram (Figure 1).
3. Filling will be completed in approximately 10 seconds. Please wait a few minutes for the gas to stabilize before use.
4. If you hear a hissing sound from the bottom after injection, it can be resolved by lightly pressing the air intake port with the tip of the pen.

[2. Ignition Method]
1. Move the switch to the ON position, and you will hear a hissing sound (Figure 2).
2. Push the ignition ring forward (Figure 3).
3. Ignite near the joint with a lighter or similar item (Figure 4).
4. After ignition, let it burn for 3 seconds, then return the ring to its original position. The flame will extinguish, and the soldering iron tip will begin to heat up (Figure 6).
5. Adjust the flame intensity with the gas adjustment knob. + indicates a larger flame, and - indicates a smaller flame.
6. The flame temperature can reach up to 1300℃ (soldering iron temperature is 450℃). Always turn the switch to OFF after use.
7. When using as a soldering iron, wait until the flame has completely extinguished (it is heated when the inside turns red).
8. The recommended flame length is approximately 1.2 to 1.5 cm.

[Precautions]
1. Replace the tip (soldering iron tip) only when it has cooled down or after it has been done beforehand.
2. The soldering iron is extremely hot and dangerous during use. Do not touch it with your hands.
3. The adjustment knob is usually sufficient in the middle position.
4. Store the item after it has cooled down. Avoid high temperatures, humidity, and direct sunlight.
5. Keep out of reach of children.
6. Fill with gas in a well-ventilated area away from open flames.
7. The nozzle may become clogged due to impurities in the gas, so regular cleaning is necessary.
8. For cleaning, lightly press the gas nozzle to eject gas for effective cleaning.
9. Do not subject the item to strong impacts.
10. Do not disassemble or repair the item yourself under any circumstances.

ss1-39$$526